No streaks, no stripes: whether it be a TV, monitor, smartphone or tablet, this display cleaner allows an unclouded view of the screen again
Anti-static ingredients prevent dust build-up after screen cleaning
Very high-quality and extremely absorbent microfibre towel for lint-free cleaning
Gentle and caring: no aggressive solvents such as alcohol, butyl glycol or methanol
Content | 400 ml |
Suitable for | Screen |
Hazardous substance picto | GHS02 - Flame |
H-Statement | H222 - Extremely flammable aerosol / H229 - Pressurised container: May burst if heated |
P-Statement | P101 - If medical advice is needed, have product container or label at hand / P102 - Keep out of reach of children / P103 - Read label before use / P210 - Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking / P211 - Do not spray on an open flame or other ignition source / P251 - Do not pierce or burn, even after use / P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F |
Signal word | Attention |
UFI-Code | VXW2-50S0-1002-CXJ4 |
Hazardous substance picto |
![]() |
H-Statement | H222 - Extremely flammable aerosol / H229 - Pressurised container: May burst if heated |
P-Statement | P101 - If medical advice is needed, have product container or label at hand / P102 - Keep out of reach of children / P103 - Read label before use / P210 - Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking / P211 - Do not spray on an open flame or other ignition source / P251 - Do not pierce or burn, even after use / P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F |
Signal word | Attention |
UFI-Code | VXW2-50S0-1002-CXJ4 |
- Always follow the device manufacturer's instructions.- Test on an inconspicuous area to ensure material compatibility before applying to larger areas.- Before cleaning, ensure that your device is switched off and has cooled down (if necessary disconnect the plug) to avoid smear formation.- Only clean the device at room temperature.- Shake well before use.- Only use the cleaner upright.
- Escaping liquid gas can cause freezing / material damage.- Apply the cleaner to a lint-free cloth. Avoid applying the cleaner directly to the device so that no fluid can penetrate the interior of the device and possibly damage it.- Do not exert too much pressure on the surface to avoid scratches caused by specks of dust.- Distribute the cleaner on the screen with the cloth and then rub the screen dry with a dry part of the microfibre cloth. This first releases the dirt and then wipes it away together with the cleaner.
- Dispose of in accordance with local regulations.